Wherever possible pendulum footprints should not overlap. Avoid overlapping testing areas in the wet which have been previously tested in the dry. Where overlapping footprints…
MoreNews & Events
HSE/HSL “Grip scheme” what do these markings mean and are they useful?
The “Grip scheme” is no longer available/maintained. Historical data may be available from HSE.
MoreHow can I be sure the footwear solution I have in place is right for the hazards in my environment?
Select suitable PPE footwear bearing the CE or UKCA mark with an appropriate category of the protection according to the risks determined in your environment….
MoreWhat testing is available to substantiate slip resistant claims by footwear manufacturers?
All manufacturers of CE/UKCA certified PPE footwear should be able to provide test data to the relevant harmonised standards. A manufacturer is not legally obligated…
MoreDo I need PTV 36+ on all floors?
See answer “What values must my floor achieve to ‘pass’ the slip test?”
MoreHow often do I have to test my floor?
To assess the risk, it is necessary to understand the slip resistance of the installed, in-service floor. Frequency of follow up tests should consider the…
MoreHow long can I rely upon a slip test certificate?
Test results will apply only to the surface at the time of test, and many test certificates will state this. Slip resistance will often change…
MoreWhich slider should I use to test a dual-traffic location like a bathroom or a changing room?
Slider selection should reflect the traffic expected, if both barefoot and shod pedestrians use the area, then both sliders shall be used.
MoreWhat is surface roughness Rz testing?
Slip resistance is dependent on the roughness profile of a surface. Rz is a peak to trough measurement and is only one parameter. It does…
MoreWhy do I need dry testing?
Dry testing is an important part of the conditioning of the slider edge. If dry testing is not possible it should be noted. On some…
MoreBecome a member and get involved in the UK Slip Resistance Group
More